2. General safety instructions
Read all the instructions before using the machine.
Know your power tool - Read the instruction manual carefully. Learn to
know your own skill and limitations as well as the specific potential
hazards peculiar to this tool.
DANGER! - The use of any accessory or attachment other than the ones
recommended in this operating instruction or T-DRILL catalogue may
create a risk of personal injury.
NOTE! Never detach the MILWAUKEE power unit from the
T-DRILL tee forming unit. Detaching the power unit will damage the
alignment made in factory.
NOTE! - The T-DRILL T-60 is designed for use with MILWAUKEE
power unit. Using any other power units with the T-DRILL
T-60 tee forming unit is not allowed.
IMPORTANT! Warranty is void if the power unit is detached from the
tee forming unit!
2.1 General safety instructions for work area
Keep work area clean – Cluttered areas and benches invite injuries.
Consider work area environment – Don’t use power tool in humid or wet
conditions. Keep work area well illuminated. Don’t use power tool in the
presence of flammable liquids or gases.
Keep children away – Do not let visitors touch the tool or it`s extension
cord. All visitors should be kept away from work area.
Stay alert – Be aware of what you are doing. Use common sense. Do not
operate tool when you are tired.
7
To Next Page
Loading...