10. Warranty
T-DRILL guarantees that every T-DRILL T-60 tee forming machine is free
from defects in materials and workmanship (other than normal wear and
tear) for a period of one (1) year from date of shipment. Should within this
period any T-60 be proved to T-DRILL's satisfaction to be defective, such
product shall be repaired or replaced. Such repair or replacement shall be
T-DRILL’s sole obligation; whereas the buyer's only obligation is to inform
T-DRILL of any such defect. T-DRILL must receive the reclamation in
writing within 10 days after a defect having been noticed and, at
T-DRILL’s option, buyer will have to return the complete tool to the
nearest T-DRILL Representative or Distribution Center. THIS
WARRANTY IS PRIMARY.
T-DRILL’s warranty shall be limited to the aforesaid warranty stipulations.
T-DRILL SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR
LIABILITIES, WHETHER ARISING OUT OF BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE) OR OTHER THEORIES OF LAW,
WITH RESPECT TO PRODUCTS SOLD OR SERVICES IMPLICATED,
OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING
THERETO. T-DRILL SHALL NOT BE LIABLE FOR AND DISCLAIMS ALL
CONSEQUENTIAL, INCIDENTIAL AND CONTIGENT DAMAGES
WHATSOEVER.
Please register your purchase by filling out and returning the
warranty registration card enclosed. Save your receipt.
33
To Next Page
Loading...