INSTRUCTION MANUAL
Version
3305-10-03
04.12.2002 LK
26.1.2004 /LK
Instruction Manual
This instruction manual includes a spare parts list and instructions for set-
up for operation, operation and maintenance of the T-DRILL T-60 tee
forming machine. Type code of manual is 3305-10-03
Manufacturer: Subsidiary: Covering North
America
OY
P.O BOX 20
FIN-66401 Laihia, Finland
Tel. Int +358-6-4753 333
Telefax: (G3) +358-6-4753 300
www.t-drill.fi
INDUSTRIES INC.
1740 Corporate Drive, Suite 820,
orcross, Georgia 30093, USA
Phone: 800-554-2730
Fax: 770-925-3912
www.t-drill.com
Your local representative is:
Copyright © 2002 T-DRILL Oy. All rights reserved. This manual, or parts thereof, may
not be reproduced in any form or by any means, nor translated into any other language
without a written permission of T-DRILL Oy.
This manual has been produced with a great deal of care and attention. All information
has been checked for accuracy. No liability will be accepted for any incorrect or
incomplete information.
2
To Next Page
Loading...