T-Fal FV28 Series - Cleaning the Anti-Scale Rod (once per month)

14
Click
4
h
• Unplug your iron and empty the water tank.
• To remove the anti-scale rod, open the water reservoir
cover and pull on the collector near the steam control.
• Soak the rod in a glass of water with some lemon juice
for 4 hours.
• Rinse the rod under the tap.
• Re-insert the rod by pushing it in until you hear a click.
Beware!
Never touch the end of the rod.
The iron does not operate without the anti-scale rod.
Cleaning the Anti-Scale Rod (once per month)