Cleaning the Anti-Scale Rod (once per month)
15
• Allow your iron to heat up with a full water tank while
on its heel rest and with the thermostat control set
to Max.
• Once the indicator light turns off, unplug the iron and
place it over a sink.
• After opening the reservoir cover, remove the anti-
scale rod.
• Shake the iron gently in a horizontal position over
the sink until some of the water (containing the
impurities) leaks from the soleplate. You may push
the turbo steam button to help flush out the minerals.
• To complete the process, re-insert the anti-scale rod
by pushing on it until you hear a click.
• Plug in your iron for 2 minutes on the heel rest to dry
the soleplate.
2
min.
Cleaning the Iron (Once a Month)
To Next Page
Loading...
