89676 06-07-2011 Page 15 of 17
Product: ELECTRIC WINCH
9000lb 9500lb 12000lb
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
12000lb FEATURES & SPECIFICATIONS
Single line rated pull 12000lbs (5443kg) single-line
Motor 5.5hp/4.0kw, Series Wound
Control Remote switch, 12ft (3.7m) lead
Gear Train 3 Stage Planetary
Gear Reduction Ratio
221:1
Clutch Sliding Ring Gear
Braking Action Automatic In-The-Drum
Drum Size Diameter 65mm Length 224mm
Cable 30m of 9.5mm diameter (Synthetic Rope)
Fairlead Hawse Fairlead
Remote Control Included
Battery Recommended: 650CC minimum for winching
Battery Leads 2 gauge, 1.9m
Finish Black Onyx
Weight NW 70.6lbs (32kg) / GW 77.2lbs (35kg)
Overall Dimensions (LxWxH) 21.9" x 6.3" x 8" (556 x 160 x 202mm)
Mounting Bolt Pattern
10.00±0.015" x 4.50±0.010" (254 x 114.3mm)
12000lb LINE SPEED & AMP DRAW (1st LAYER)
LINE LOAD
LBS/KGS
LINE SPEED
MOTOR
CURRENT
(CM) MPM FPM
0/0 600 6.0 19.7 70.0
2000/907 348 3.5 11.4 125.0
4000/1814 224 2.2 7.3 190.0
6000/2722 174 1.7 5.7 230.0
8000/3629 124 1.2 4.1 279.0
10000/4536 96 1.0 3.1 334.0
12000/5443 80 0.8 2.6 362.0
To Next Page
Loading...