T-Mobile TM1393 - Charging the Battery; Use USB Cable; Use AC Adapter; Turning on Device

Section 1, page 18
Charging Battery
Use USB Cable
1. Insert the USB plug into a USB port on your computer.
2. Insert the other end of the USB cable into the sync connector port on the
bottom of the device
NOTE: only the AC adapter and USB cable provided with your device should be used to charge
the device.
Use AC Adapter
1. Insert the AC adapter plug into an electrical outlet.
2. Insert the other end of the AC adapter into the sync connector port on the
bottom of the device.Fully charge the battery (2-3 hours) prior to use.
Turning on Device
To turn on the device, press the Power key on the top of the device. You can start
using your device to make calls. See the Using Phone Features section in this
guide for more information.