Tack life PMS03 - Safety Instructions and Warnings; Description of Symbols

- EN -
Table of contents
1.
Description of symbols
2.
Machine components
3.
Accessories
4.
Machine components (A1/4)
5.
Proper usage
6.
General Safety instructions
7.
Special safety instructions
8.
Before starting
9.
Transport
10.
Assembly
11.
Working with the crosscut and mitre saw
12.
Maintenance and care
13.
Technical data
14.
Environmental protection
1. Safety instructions and warnings
The equipment complies with the safety regulations required for electrical equipment. Read
through the instructions for use before starting up the equipment.
Improper use can lead to personal injury and property damage. Persons, who are not familiar
with the instructions, may not operate the equipment.
Keep the instructions for use in safe custody. Children and youths are not permitted to operate
the equipment.
2. Description of symbols
Pay attention to all the signs and symbols shown in these instructions and on your tool. Make a
note of these signs and symbols. If you interpret the signs and symbols correctly, your work with
the machine will be safer and better.
Important.
Do not look straight into the laser. Laser class II
Important.
Read the instructions for use before starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when machining materials
which generate dust.
- 07 -