Taco VT Series

11
H6: PACKING BOX
TROUBLE SOURCE PROBABLE CAUSE REMEDY
Excessive leakage
1. Improper packing
2. Incorrect type or defective packing
3. Worn shaft or sleeve
1. Repack correctly.
2. Repack with the correct grade for service.
3. Remachine or replace scored parts.
Packing box overheated
1. Improper packing procedure
2. Packing too tight
3. Insufficient lubrication
4. Incorrect type of packing
1. Repack correctly.
2. Repack with the correct grade for service.
3. Remachine or replace scored parts.
Packing wears prematurely
1. Improper packing
2. Insufficient lubrication
3. Shaft or sleeve scored
4. Incorrect type of packing
1. Remove cause.
2. Replace worn parts.
3. Remachine or replace
I: ORDERING PARTS
Please contact your TACO representative with the serial
number of the pump for more information. The serial number of
the pump can be found on the pump information tag.
NOTES