Tactik 3033109 - Step 7: Securing Rear Clamps; Step 8: Inserting Safety Locking Pins

1028 Saunders Lane 610.701.3336 ext. 3746
West Chester, PA 19380 404.558.8652 cell
610.701.2402 fax
6 / 9
S o f t T r i f o l d T o n n e a u C o v e r
C o v e r
Secure the Rear Clamps (left and right) by pulling the clamp handle
down to clamp the metal bed wall edge of truck. Note: If necessary,
adjust the clamp position by rotating the clamp on the bolt to ensure
the clamp is tightly clamped on the metal bed wall edge of truck. Do
not secure to only lip of bedliner or rail cap.
Step7
Insert Safety Locking Pins into Rear clamps.
Step8