1
SAFETY WARNINGS
AND CAUTIONS
WEAR SAFETY GLASSES AND GLOVES WHEN REMOVE STRAPPING AND PACKAGING MATERIALS.
STRAPS CAN SNAP WHEN REMOVED CAUSING PERSONAL INJURY.
WEAR SAFETY GLASSES when replacing or repositioning ball bearing drawer slides.
DO NOT pull this product, but push the product to prevent personal injury. Swivel caster and push
bar must be placed on same side of the product.
USE THE BRAKE when this product is not being moved. The brake will prevent accidental rolling
which may cause product damage or personal injury.
DO NOT open more than one drawer at a time as this may cause the product to tip causing
personal injury or product damage.
DO NOT alter this product by welding attachments or adding electrical equipment. Do not mount
this product on a moving object or vehicle as this may cause personal injury or product damage.
DO NOT tow this product with moving equipment or vehicles as this may cause product to tip,
causing personal injury or product damage.
DO NOT step in drawers or on top of the unit as this may cause the product to tip. This may cause
personal injury or product damage.
Take caution when closing the chest lid and remove your hands before chest lid is closed
completely.
Maximum loading per drawer of the top chest should not exceed 22 lb. (10 kg).
Maximum loading per drawer of the bottom cabinet should not exceed 66 lb. (30 kg).
Maximum product weight (including contents) should not exceed 772 lb. (350 kg).
To lock a chest, close drawers before closing chest lid, and make sure all drawers are rmly closed
to ensure proper function of locking bars.
Always use the proper sized cabinet and chest combination. Improper matching of cabinet and
chest components can cause the product to tip which may result in personal injury or product
damage.
DO NOT use the product on uneven surfaces or inclines as this may cause the product to tip or
become unstable resulting in possible personal injury or product damage.
1
2
3
4
5
6
7
8
9
10
11
12
13
To Next Page
Loading...