TAD M10 -VHF User Manual

We at TAD Radio of Canada Inc., a distributor and designer of professional two-way radios, thank you for using
the M10. We are confident that you will be pleased with the M10 -VHF and it will provide you with dependable,
trouble-free communications.
IMPORTANT
Please read all the instructions thoroughly
before operating the unit.
INTRODUCTION
The M10 is capable of 396 channels. This is achieved by 4-groups of 99 channels each. Your dealer has the
option of designating different frequencies in each group of the radio for you. This is like having 4 radios in 1.
The M10 covers 138-174 MHz without having to be retuned. It has an alphanumeric display for the channel
numbers, channel names, and channel frequencies. The display can be dimmed if necessary, and the display
buttons have been backlighted for easier viewing. Its’ new compact size and lighter weight make installing the
M10 quicker. For information on the M10 functions, please read the following pages.
The following is a list of items which can be programmed by your Dealer.
General Radio features:
-1,2, or 4 Banks of 99 channels each plus operating options within each Bank.
-Enable “Theft Protection” by installing a lock number.
Each Bank may be programmed with:
-TX Time out Timer(30 to 300 seceonds).
-How the “Priority” channel reacts when coming off hook.
-Beeps turned off.
Each Channel may have:
-A Receive(RX) and a Transmit(TX) frequency from 138 to 174 MHz.
-A RX and a TX subaudible tone - CTCSS or DCS(Digital Coded Squelch).
-A Busy Channel Lockout in conjunction with the channel tone.
-A Channel name. This can be an ALPHA name or a NUMERIC number.
-TX RF power at a HIGH or a LOW setting. (Usually 30 watts or 10 watts).
USER MANUAL
TAD M10

TAD M10 -VHF Specifications

General

Frequency Range	136-174 MHz
Number of Channels	16
Output Power	5W
Operating Voltage	7.4V
Battery Life	12 hours

Summary

M10 Radio Controls Overview

PWR/VOL Control

Controls power on/off and adjusts audio level by rotating clockwise.

SQL Control

Manages receiver silencing circuitry, adjusting sensitivity for optimal signal reception.

Panel Button Functions

Details the dual functions of the four front panel buttons when pressed or held.

Radio Indicators and Their Meanings

GROUP Indicator

LOW Indicator

MON Indicator

PRI Indicator

SCAN Indicator

BUSY Indicator

TONE Indicator

Radio Operating Modes

Scan Mode Operation

Details how the radio scans channels and resumes after a busy channel clears.

Priority Mode Operation

Explains how the radio monitors and responds to the priority channel.

User Programming Mode

Guides on accessing and navigating the four modes within user programming.

Power-Up Warnings and Display Messages

TX Time Out Timer (TOT)

Invalid Lock Code Entry

Warning for incorrect entry of the lock code during power-up.

Locked Radio Status

Indicates the radio is locked due to repeated incorrect code entries.

No Scan Channels Selected

Priority Channel Active

Theft Protection and Radio Specifications

Theft Protection Setup

Procedure for entering a four-digit lock number for theft protection.

Radio Specifications

Technical details including frequency range, channels, power, and dimensions.

Transmitter and Other Features

Transmitter Specifications

Details RF output power, spurious emissions, hum & noise, and audio response.