Need help?Do you have a question about the TAD Reference One and is the answer not in the manual?
General| Brand | TAD |
|---|---|
| Model | Reference One |
| Category | Speaker System |
| Language | English |
Safety guidelines for speaker installation, usage, and placement to prevent hazards and damage.
Key notices including model/serial number recording and product disposal guidelines.
Critical safety warning regarding small parts and potential ingestion by children.
Company philosophy and dedication to sound quality and craftsmanship.
Overview of the TAD Reference One loudspeaker and its key technologies.
Explanation of the benefits of beryllium material for diaphragms in terms of strength and lightness.
Description of the CST driver, its concentric design, and frequency range for point-source sound.
Information about the collaboration with Tendo Mokko for the premium enclosure finish.
Warning that installation should be done by specialists and disclaimer for improper installation.
Warning about the product's weight and potential floor damage from spikes.
Guidance on placing the unit on flat surfaces or using spikes for uneven floors.
Critical safety warning to use two people and avoid pinching fingers during spike installation.
Instructions to screw spikes all the way in for secure speaker placement.
Warning about potential damage to the unit if moved with spikes inserted.
Guidelines on avoiding direct sunlight, heating appliances, and maintaining specific environmental conditions.
General safety precautions for connecting speakers, including power off and cable security.
Step-by-step instructions for connecting speakers using a single wire.
Warning about potential amplifier damage if shorting links are not removed before bi-amping.
Explanation and diagram for setting up vertical bi-amplification using separate amplifier channels.
Tips for adjusting speaker placement to achieve optimal and even bass response.
Guidance on adjusting speaker placement and toe-in for precise stereo imaging.
Advice on adjusting listening position and room acoustics for the best overall sound.
Warnings against using harsh cleaners or chemicals on the speaker enclosure finish.
Product identification including model name.
Product identification including model number.
Information on design, drive units, performance data, and physical dimensions.
List of items provided with the loudspeaker.
Steps to set a safe listening volume to protect hearing from distortion or damage.
Important guidelines for safe listening habits and avoiding hazardous situations.
To Next Page
