TAGLIAVINI ROTOR RT 88

Questions and Answers

A
Allison ObrienAug 15, 2025
How to fix uneven cooking in my TAGLIAVINI ROTOR RT 88 Oven?
- M
  meganbarnettAug 15, 2025
  To address uneven cooking in your TAGLIAVINI oven, start by checking if the recirculating air fan is working and rotating in the correct direction. Next, verify that the carriage rotation geared motor is operational and rotating as indicated by the arrow. Ensure the outgoing air louvres comply with the dimensions specified. Lastly, inspect the temperature probe for any faults and replace it if necessary.
K
Kimberly HuffAug 19, 2025
What causes water on the platform of my TAGLIAVINI Oven and how to fix it?
- E
  Eric HollandAug 19, 2025
  If you find water on the platform of your TAGLIAVINI oven, it could be due to several reasons. First, check for a clogged non-vaporized water pipe drain and clean or replace the pipes. Next, inspect the condensate collection tray for blockages and clean the tray and its drain thoroughly. If the condensate collection tray is pierced, it will need to be replaced. Finally, examine the hydraulic system for leaks in the fittings, hose clamps, pipes, and solenoid valves, and replace any defective parts.
R
Ronald BrownAug 23, 2025
Why does my TAGLIAVINI ROTOR RT 88 steam have traces of red rust?
- B
  Bryan ValenzuelaAug 23, 2025
  The presence of red rust in your TAGLIAVINI oven's steam could be due to oxides in the water. In this case, install a water softener upstream of the oven's hydraulic system. It may also be caused by aggressive, acidic water. Check the steamer's supply water quality, as uncontrolled water softeners can lead to acidic water. Eliminate water acidity to resolve this issue.
J
Jennifer McdonaldAug 27, 2025
Why does the vapour aspirator not work in my TAGLIAVINI Oven?
- J
  Jonathan GloverAug 27, 2025
  If the vapor aspirator in your TAGLIAVINI oven isn't working, check if the vapor aspirator circuit breaker has been tampered with or is faulty. If faulty, replace it; if tampered with, determine the cause before resetting. Verify if the vapor aspirator contactor receives input signals, and if not, replace it. If the vapor aspirator electric motor has failed, replace it. Finally, check the continuity of all electrical connections.
R
Robert MatthewsSep 1, 2025
How to troubleshoot oven lighting failure in TAGLIAVINI ROTOR RT 88 Oven?
- D
  deleonmatthewSep 1, 2025
  To troubleshoot a lighting failure in your TAGLIAVINI oven: * Replace any burned-out lamps. * If the lamps aren't the issue, the transformer may have failed and need replacement. * Check for interrupted electrical connections and light power supply cables. * A faulty control unit or power unit could also be the cause; check their operation and replace if necessary.
S
Shelly DavisNov 5, 2025
Why is my TAGLIAVINI ROTOR RT 88 Oven not getting hot enough?
- J
  Jennifer SanfordNov 5, 2025
  There are several possible reasons why your TAGLIAVINI oven isn't heating properly. It could be due to the main switch or residual current device not being properly plugged in, or the power supply cables not connected to the oven. Check the main protection fuse continuity and replace if faulty. Also, one or more transformer protection fuses might be interrupted; in this case, check the cause and replace the blown fuses, or reset the tripped circuit breaker. Ensure the circuit breakers are in the operational position ('I'). The power supply unit might not be working, so check the connections and cables, replacing them or the card if needed. A control unit fuse could be interrupted, requiring replacement. The control unit may be set to a programmed start-up; disable this setting. Alarm signa...
R
Robin ChanNov 9, 2025
What to do if my TAGLIAVINI Oven does not emit steam?
- T
  Toni ParksNov 9, 2025
  If your TAGLIAVINI oven isn't emitting steam, first check if the steamer operation has been disabled from the control panel. Ensure there is water reaching the steamer's solenoid valves and that the water valve is open. Inspect the filter on the water manifold for dirt and clean it if necessary. Verify the solenoid valve's operation and replace it if faulty. Check the steamer for limestone deposits and clean or replace it if needed. Examine the steamer's spray tube for clogs and clean it. Also, clean the steamer's non-vaporized water drain. Make sure the steam drain valve is closed when dispersing steam and check its functioning. Check the control unit and power unit for correct operation and replace if faulty. Finally, determine the cause and replace the 220Vac electric system's protectio...