Step 2B: For the most compact re-packing (useful if you have limited storage
space or plan to travel).
To remove the maximum amount of air from the board use your inflation pump in
reverse. To do this attach the hose to the “DEFLATE” side of the pump. When you
pump the air will now be coming out of the board. Once all air is removed press the
white valve pin to close the valve (UP position) to ensure no air can re-enter the board.
Replace the valve cover once deflation is complete.
STEP 3: Use the included compression
strap to keep the board rolled up
securely.
STEP 4: Store the board
inside the included storage
backpack. Additional
accessories can also be
stored in the backpack as
well as on the outside of the
backpack using the
included straps.
To Next Page
Loading...