Need help?Do you have a question about the Taiden HCS-4800 Series and is the answer not in the manual?
Comprehensive safety instructions covering handling, installation, and operational precautions.
Overview of the TAIDEN HCS-4800 Fully Digital Congress System technology and features.
Details on MCA-STREAM 2.0 technology and HCS-4800 hardware structure.
Description of core functions including discussion, voting, and interpretation.
Key system features emphasizing reliability, extensibility, and operability.
Functions, instructions, and connections for the main congress unit.
Functions, instructions, and connections for the extension main unit.
Functions, instructions, and installation for the extension unit.
Introduction to HCS-4800 series congress units and their capabilities.
Functions, indications, installation, and connection of HCS-4890N/80 series units.
Functions, indications, and connection for HCS-4891/80 series congress units.
Functions, indications, and connection details for HCS-4838 series congress units.
Functions, indications, installation, and connection for HCS-48U6 series units.
Functions, indications, and connection for HCS-48U7/U9/80 series congress units.
Functions, indications, installation, and connection for HCS-48U10/80 series units.
Functions, indications, and connection for HCS-4860/80 series congress units.
Functions, indications, installation, and connection for HCS-4840DHT and HCS-4842DHT.
Functions, indications, and connection for the HCS-4841DMIC multifunction connector.
Functions, indications, and connection for HCS-4813 series congress units.
Functions, indications, installation, and connection for HCS-4827H and HCS-4827SELM.
Functions, indications, installation, and connection for HCS-4857 series lifting microphones.
Functions and indications for the HCS-8685 interpreter unit.
Connection methods for the interpreter unit to CMU/EMU and other units.
Configuration steps for direct, relay, and auto-relay interpretation.
Operation details for listening and speaking areas of the interpreter unit.
Overview of HCS-4800 system connection principles and hardware.
Guidelines on power capacity, cable lengths, and system load limits.
A basic example configuration of the HCS-4800 system with its components.
Details on removable stem microphones, pluggable microphones, and windshields.
Overview of various earphone and headset models compatible with the system.
Introduction to essential cables, converters, and other system accessories.
Guidelines for cable management and microphone usage in public areas.
Recommended environmental conditions and safety precautions for technical rooms.
Requirements for the operator room in a PC-based system.
Instructions for safely cleaning the equipment.
General system performance, environmental conditions, and compliance standards.
Physical and electrical specifications for the HCS-4800M series main unit.
Details on pluggable stem microphones, earphones, and other accessories.
Information on mains cables, audio cables, and earphone jack connections.
List of supported languages for system display and interpretation.
General| Power Supply | DC 24V |
|---|---|
| Audio Output | Line Out, Headphone Out |
| Connectivity | Wired |
| Type | Conference System |
| Control Interface | RS-232, TCP/IP |
| Audio Input | Line In, Microphone In |
| Microphone | Gooseneck microphone |
| Signal-to-Noise Ratio | >70dB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 50°C |
To Next Page
