9 NEED HELP?
TAILWIND iQ3 USER MANUAL
STEP 6 - PLUG IN THE POWER ADAPTER
PLUG THE POWER ADAPTER INTO A WALL OUTLET AND
THE OTHER END INTO THE CONTROL MODULE
NOTE: THE STATUS LIGHT WILL FLASH RED
STEP 7 - CONNECT THE APP TO THE CONTROL MODULE
THE APP WILL PROVIDE INSTRUCTIONS. COME BACK TO
THESE INSTRUCTIONS AFTER YOU COMPLETE THIS STEP.
OPEN THE APP AND REGISTER AS A NEW USER
2. BRIEFLY PRESS THE RESET SWITCH ON THE TAILWIND UNIT USING THE
PROVIDED TOOL AND CONFIRM THE STATUS LIGHT FLASHES BLUE
3. IN THE MY DEVICES SCREEN SELECT “CONNECT TAILWIND TO HOME WIFI
FOLLOW THE SETUP STEPS PROVIDED IN THE APP
To Next Page
Loading...