Tait T 9100 Series User Manual

70 Scanning
Changing a group’s transmit
channel
You can change the group’s transmit channel
only if it has been pre-programmed.
1 In the Radio settings menu, select Edit groups
and select a scan group. Press Select.
2 In the Edit Group menu, select Change Tx and
press Select.
The current transmit channel is identified by the
icon beside the channel name.
3 Select the new transmit channel and press OK.
The transmit channel remains changed even
after the radio is turned off.
Changing a group’s priority
channels
1 In the Radio settings menu, select Edit groups
and select a scan group. Press Select.
2 In the Edit Group menu, select Change P1 or
Change P2 and press Select.
The current priority channels are identified by the
or icons beside the channel names.
3 Select the new priority 1 or priority 2 channel and
press OK.
Change Tx
A:DSE-PP1 111
A:DSE-PP2 112
OKBack
Change P1
A:DSE-PP1 111
A:DSE-PP2 112
OKBack

Tait T 9100 Series Specifications

General

Brand	Tait
Model	T 9100 Series
Category	Two-Way Radio
Language	English