Test Equipment needed for the conversion
1. Multimeter (e.g. Analogue)
2. DC electronic voltmeter (e.g. Digital)
3. RF Power meter 30 watts FSD usable to 100mhz with 5 and 30 watt elements
4. Power supply output adjustable between 9 and 16 volts DC and with a capacity of at least
5 amps
5. VHF Signal generator Good quality FM Usable from 0.1µf (-127dbm) to 200mV (0dbm) pd
6. Frequency counter accurate to with in 2ppm.
7. Dummy load capable to at least 100 watts
To Next Page
Loading...
