M800-00 Software History A5.1
Copyright TEL 30/04/98
5 Software History
23/11/89 BASEPROG Version 1
23/08/90 PGM800 Version 2
11/06/91 PGM800 Version 2.01
03/10/95 PGM800 Version 2.21
28/06/96 PGM800Win Version 1.00
18/08/97 PGM800Win Version 2.00
5.1 BASEPROG V1/PGM800 V2
T800 programming software was originally developed as BASEPROG V1 and released
as PGM800 V2.
5.2 PGM800 V2.01
The major changes introduced with V2.01 are as follows:
• Full support for different display adaptors.
• Programming of CTCSS frequency data (optional) for individual channels.
• Full cursor control in edit mode.
• User selectable output file format (hex or binary).
• Support for wider range of T800 equipment.
• DOS shell facility implemented.
• CTCSS defeat possible when CTCSS tone is not selected.
• Channel numbering changed from 0-127 to 1-128.
• An "X" included on the printout to indicate that there are 8 switches on the DIP
switch and the state of the MSB is dependent on the size of the EPROM used.
Note:
The data files produced by BASEPROG V1.0 are still compatible with
PGM800 V2.01.
To Next Page
Loading...
Need help?
General
