To Next Page

To Previous Page

M800-00 Software History A5.3

Note:

The datafiles produced by BASEPROG V1.0 and all DOS versions PGM800

are still compatible with PGM800Win V1.00.

5.5 PGM800Win v2.00

PGM800Win V2.00 is an upgraded and expanded version of PGM800Win V1.0. It has

been developed specifically for T800 Series II base stations but also has the capability of

programming Series I equipment.

Major changes are outlined below:

• The Windows environment makes data entry and editing significantly easier.

• Includes several new radio models which are not programmable with DOS ver-

sions of PGM800.

• Out of range frequencies will result in warning messages and will not be accepted

for entry into the standard library module. User defined modules can be created,

allowing variation from the standard library module.

• Channel numbers default to 0-127 to match the EPROM memory locations, how-

ever the user can change this setting so that the channel numbers run from 1-128

to suit his/her particular needs.

• The ability to program T800 Series II base station modules via serial communica-

tions.

• Deviation and reference modulation settings are written automatically to the

radio.

• Extra information that is not stored in the radio (but is information relevant to the

radio) can be saved to a file on disk (e.g. note field, auxilliary pin names etc).

Note:

The datafiles produced by BASEPROG V1.0. all DOS versions of PGM800

and PGM800Win V1.0 are still compatible with PGM800Win V2.00.

Tait T800 II Series User Manual

Questions and Answers: