49 Operation
No-key no-display radio
■
Press the function key programmed to make a call
alert to the predefined contact.
The LED flashes when your radio is sending the call
alert.
If the Call Alert acknowledgement is received, two
chirps sound.
or
If the Call Alert acknowledgement is not received, a
low-pitched tone sounds.
Sending a quick text message
16-key radio
■ Press the function key programmed to send a pre-
defined quick text message to a predefined con-
tact.
or
■ Press the function key programmed to open the
Quick Text function. Go to step 2 below.
or
1 Press Menu and select Message > Quick Text.
2 Scroll to the required quick text and press Select.
3 Use the keypad to edit the message, if required.
a. Press to move to the left.
b. Press to move to the right.
c. Press the * key to delete any unwanted
characters.
d. Press the # key to input one space to the right.
e. Long-press the # key to switch between
lowercase, upperacase and numeric input.
4 Press Confirm.
To Next Page
Loading...
Need help?
General
