Fuel types compatible with hand fed T-Range appliances: -
• Wood off cuts
• Chipboard
• MDF
• Softwood
• Hardwood
• Pallets
Off cuts of fuel must not exceed 20% moisture and with dimensions not exceeding
500mm x 100mm x 200mm. Sawdust must not be burned on the appliance.
Responsibilities of the Operating Company
The operating company is responsible for complying with the Health and Safety
requirements as prescribed by law. In addition to the safety instructions contained in
this manual, local regulations regarding safety, accident prevention and environmental
protection must also be complied with.
The operating company must:
- Carry out a risk assessment to determine additional dangers that arise from the
specific working conditions on the site of operation. Specific instructions based
on your risk assessment must be accessible at any time for the operation of the
appliance
- Periodically check whether instructions compiled continue to comply with
updated health and safety guidelines and alter accordingly.
- Define the responsibilities for operation, maintenance and cleaning of the
appliance and appoint a competent person for each role.
- Provide periodic staff training.
- Provide operators with required personnel protective equipment as required.
- Ensure all staff with any interaction with the appliance have read and
understood this manual.
To Next Page
Loading...
