- Ensure the appliance is technically sound at all times. The below must be
adhered to:
• maintenance intervals described in this manual are complied with
• all necessary safety and protective devices are operational and checked
before start up
All staff operating this appliance must receive training by the manufacture or
manufacture approved operatives. Unauthorised personnel should be kept away from
the appliance.
Personnel Protective Equipment
During contact with the appliance PPE must be worn in accordance with Health and
Safety Regulations in order to minimise health risks.
- Protective Clothing - Protects users from entrapment in moving parts.
Jewellery should not be worn
- Safety Shoes - Protects user from heavy fallen or dropped objects aid aids
grip on wet surfaces
- Safety Gloves - Protects hands from abrasions and hot surfaces
-
- Protective Goggles - Protects eye’s from flying debris and splashes of liquid
-
- Light Breathing Protection - Protect from health damaging dust.
Parts and Servicing
Replacement Parts and Accessories
Only purchase replacement parts from the manufacturer or through authorised dealers
unless instructed by the manufacturer. Spare parts prices can be provided upon
request by contacting Talbott’s Service Department. Please refer to contact details
included within this document. Please ensure you have the model and serial number
in advance. If contacting by email it’s advised to send a digital photo to assist in
identification. Modifications should not be made to the appliance without the
manufacturer’s written permission.
Servicing Your Appliance
If a fault occurs with the appliance that cannot be identified using this manual or you
have a question of a technical nature, please contact Talbott’s Service Department to
assist. Talbott’s have engineers who operate throughout the UK and abroad. It may be
recommended to have your appliance serviced by a qualified Talbott’s engineer from
every 3-12months depending on the appliance and usage. Please contact the service
department for prices and availability.
The manufacture must be notified of any accidents or near incidents.