Need help?Do you have a question about the Tamiya Super Champ 5834 and is the answer not in the manual?
General| Brand | Tamiya |
|---|---|
| Model | Super Champ 5834 |
| Category | Motorized Toy Car |
| Language | English |
Lists essential components not included in the kit, such as the RC unit itself.
Details required battery types and specifications for the model.
Identifies tools provided within the model kit for assembly.
Lists necessary tools and parts that must be purchased separately.
Explains the function of transmitter, receiver, and servos in the RC system.
Describes the transmitter's role as the control box for the RC system.
Explains how the receiver captures signals from the transmitter.
Details how servos convert receiver signals into mechanical movements.
Important reading before starting the assembly process to ensure correct procedure.
Instructions on how to properly use Allen keys to avoid damaging screws.
Step-by-step guide for installing various shafts and related components.
Instructions for assembling the gear case with its internal components.
Guidance on how to attach the rear suspension arm to the chassis.
Detailed steps for installing the motor into the model.
Instructions for installing the gears, including gear ratio choices.
Procedure for filling the shock absorbers with oil.
Steps for assembling and attaching the rear shock absorber units.
Guidance on how to install the roll bar for structural support.
Steps for attaching the main chassis components.
Instructions for assembling and installing the front shock absorbers.
Guide to assembling and adjusting the servo saver mechanism.
Steps for assembling the front axle mounting system.
Guidance on assembling uprights and steering components.
Instructions for fitting the front axle into the model.
Steps for connecting the main steering components.
Guidance on attaching the front bumper to the chassis.
Instructions for fitting the servo horns to the steering servos.
Adjusting the servo horn for the speed controller.
Procedure for adjusting the speed controller settings.
Steps for installing the switch servo and related parts.
Guidance on mounting and securing the antenna.
Procedure for installing the receiver and connecting wires.
Steps for installing the main mechanism deck.
Instructions for assembling the front and rear wheels.
Guidance on fitting the assembled wheels to the model.
Steps for installing the headlights and other lights.
Instructions for fitting and painting the driver figure.
Guidance on mounting the roof wing accessory.
Final steps to complete the model assembly.
Instructions on how to detach the car body from the chassis.
Checks to perform before operating the model to prevent issues.
Step-by-step guide on how to operate the RC car correctly.
Guidance on diagnosing and resolving operational problems.
Tips and suggestions for painting the model's body.
Techniques for using masking tape for precise paint applications.
Instructions on applying decals and markings to the model.
To Next Page