Need help?Do you have a question about the Tamiya WR-02CB and is the answer not in the manual?
General| Scale | 1/12 |
|---|---|
| Wheelbase | 170 mm |
| Chassis | WR-02CB |
| Drive Type | 2WD |
| Terrain Use | Off-Road |
| Differential Type | Gear Differential |
| Body Material | Polycarbonate |
| Bearings | Plastic bushings |
| Motor | 540-type |
| Damper Type | Friction |
| Speed Controller | Electronic Speed Controller (ESC) |
| Chassis Material | Plastic |
| Tire Width/Diameter (Front) | 35 mm/110 mm |
| Tire Width/Diameter (Rear) | 45/95mm |
| Gear Ratio | 18.3:1 |
| Shock Dampers | Friction dampers |
| Required Equipment | 2-channel radio, servo, 7.2-7.4V battery & charger |
Introduction to the WR-02CB 1/10 scale high-performance off-road racer chassis.
Lists necessary items, tools, and optional parts for assembling the RC car kit.
Details on the recommended 2-channel R/C system, including transmitter, receiver, and ESC.
Provides essential safety guidelines for handling tools, small parts, and working in a safe environment.
Explains the function and composition of the transmitter, receiver, ESC, and steering servo.
Instructions on reading manuals, checking parts, and preparing for assembly.
Detailed steps for assembling the rear arm components of the chassis.
Instructions for mounting the wheelie bar assembly to the chassis.
Steps for installing the rear upright components onto the chassis.
Procedure for verifying the correct operation of the transmitter, receiver, and servos.
Guide to choosing the appropriate screw for attaching the servo horn.
Instructions for connecting the tie-rod components to the chassis.
Detailed steps for assembling the main chassis frame components.
Warning about plastic damage from solvents and non-use of thread lock.
Steps for assembling the front arm components.
Instructions for mounting the assembled front arms to the chassis.
Steps for installing the front axles onto the chassis.
Instructions for installing the front upright components.
Detailed steps for assembling the front and rear shock absorbers.
Guide to choosing and filling the shock absorbers with silicone damper oil.
Steps for fitting coil springs onto the shock absorber assemblies.
Instructions for mounting the assembled shock absorbers onto the chassis.
Introduction to Tamiya's range of high-quality tools for model building.
Instructions for mounting the gearbox assembly to the chassis.
Steps for installing the rear body mount components.
Information on optional LED light units for enhancing the model's appearance.
Steps for installing the front body mount components.
Instructions for connecting the side frame components to the chassis.
Steps for installing and connecting the receiver, ESC, and motor.
Instructions for assembling the front wheels, including tire fitting.
Diagram illustrating how to connect motor codes to the ESC and receiver.
Steps for assembling the rear wheels, including tire fitting.
Instructions for mounting the assembled front and rear wheels onto the chassis.
Important reminder to check tire rotation direction during wheel assembly.
Steps for mounting the front bumper assembly to the chassis.
Instructions for correctly placing and securing the battery pack in the chassis.
Important reminder to disconnect the battery when the car is not in use.
Steps for assembling the driver figure and attaching lights to the body.
Instructions for mounting the car body onto the chassis.
Warning against continuous running to prevent motor and chassis damage.
Detailed steps for assembling the differential gear mechanism.
Instructions for installing the assembled differential into the gearbox.
Information on optional bearing upgrades for the gearbox.
Steps for assembling the main gearbox housing components.
Instructions for mounting the motor onto the motor plate and gearbox.
Reference to Tamiya's website for additional information and resources.
Step-by-step guide for safely turning the RC car and transmitter on and off.
Procedures for checking car movement, steering, and making trim adjustments.
Instructions for disconnecting battery, cleaning the car, and applying grease.
Tips for practicing driving skills, such as figure-eight patterns and cornering.
Guide to identifying and resolving common issues with the RC car's operation.
Visual guide to identifying major plastic parts included in the kit.
Visual guide to identifying more plastic parts and tires.
List of part codes and diagram of gearbox components.
Continued identification of various parts, including damper components and springs.
Detailed breakdown of gearbox components, including gears, shafts, and bearings.
Information on how to order replacement parts and contact customer service.
Details on ordering parts via mail, phone, or website using Tamiya customer service.
To Next Page