EasyManua.ls Logo

TANACOM BULL 750 - User Manual

TANACOM BULL 750
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Thank you for purchasing a TANACOM BULL 750. To take full advantage of the
reels many useful functions, please read this manual carefully before using. Retain
this manual for future reference.
OPERATING MANUAL
Reference
Reference

Table of Contents

Questions and Answers

  • F
    fstoneAug 13, 2025
    Why is the motor on my TANACOM BULL 750 Fishing Equipment not responding to the power lever?
    • S
      Sheri SimsAug 13, 2025
      If the motor of your TANACOM Fishing Equipment doesn't respond and the counter displays 0.0 m, this is a normal function to prevent over winding. To continue winding, simply press the RESET BUTTON. Also, ensure the power lever is in the OFF position before moving it forward to start winding. An unstable power source can also cause this issue; try using a dedicated electric reel battery.
  • R
    Rachael SmithAug 16, 2025
    What to do if the counter display does not appear on my TANACOM BULL 750 Fishing Equipment?
    • L
      lori18Aug 17, 2025
      If the counter display on your TANACOM Fishing Equipment isn't appearing, it could be due to a few reasons. First, check if the battery charge is low and recharge it if necessary. Another possible cause is a worn or corroded cord, which would need to be replaced. Finally, ensure that the battery is connected correctly.
  • T
    Travis DiazAug 20, 2025
    Why does the auto stop function not work on my TANACOM Fishing Equipment?
    • S
      Sarah DiazAug 20, 2025
      If the auto stop function on your TANACOM Fishing Equipment isn't working, make sure you've pressed the RESET BUTTON at the surface to reset the depth to zero with the rig at the surface. The issue could also be due to errors in sinker weight or boat rocking, requiring you to adjust the auto stop function settings. Also, if the line is elongated, you should reset the depth counter at the surface.
  • B
    Brenda SandersAug 25, 2025
    Why is my TANACOM BULL 750 reel jigging on its own?
    • J
      Jamie NguyenAug 25, 2025
      If your TANACOM Fishing Equipment reel starts jigging on its own, the issue could stem from low power voltage. Try replacing the battery with a recharged one. Alternatively, if you're using boat power, be aware that an unstable power supply on the boat may cause this malfunction. In this case, switch to using a dedicated battery for electric reels.
  • T
    Todd LaneAug 28, 2025
    How to display the inverse counter on my TANACOM BULL 750?
    • S
      Stephanie SmithAug 28, 2025
      If the inverse counter is not appearing on your TANACOM Fishing Equipment, and you haven't pressed the PICKUP / JIGGING BUTTON, this is normal. Press the INVERSE COUNTER BUTTON. If it doesn't appear while winding up automatically, use the MODE BUTTON to turn the inverse counter mode ON.
  • J
    Jason WallaceSep 1, 2025
    What to do if the jigging function does not respond on my TANACOM Fishing Equipment?
    • D
      dvillanuevaSep 1, 2025
      If the jigging function on your TANACOM Fishing Equipment isn't responding, first check that the power lever is not at OFF; push it forward. If that's not the issue, ensure that pickup mode isn't selected. Use the MODE BUTTON to select the jigging mode.
  • C
    Charles PageSep 4, 2025
    Why are there counter errors on my TANACOM BULL 750?
    • A
      andrew43Sep 5, 2025
      If you're experiencing counter errors with your TANACOM Fishing Equipment, it could be due to the line length increasing because of stretching. To resolve this, reset the counter, revise the display, and re-enter the line data.
  • J
    James WebbSep 9, 2025
    Why does the pickup not respond on my TANACOM BULL 750?
    • C
      cpenningtonSep 9, 2025
      If the pickup function on your TANACOM Fishing Equipment is not responding, it might be because the speed setting is at zero. Press the MODE BUTTON to select a winding speed setting.

Summary

OPERATING MANUAL

Caution

Precautions

Important safety warnings and user guidance for operating the reel.

About the Counter Display

Conditions that may affect the visibility of the reel's display.

Do Not Reel in the End of the Line

Instructions to prevent damage by not winding the end of the line onto the spool.

Power Source

How to Connect the Reel to the Power Source

Step-by-step guide for connecting the reel to a power supply.

About the Power Source

Information on compatible power sources and potential issues.

Battery Indicator

Explanation of how the reel indicates battery voltage status.

Using the Reel

About the Counter Display

Conditions affecting display visibility, including polarized glasses and temperature.

Maintenance

About Maintenance

General advice on cleaning the reel after fishing.

Maintenance Procedure

Step-by-step guide for washing and drying the reel.

Handling and Maintenance of the Power Cord

Guidelines for proper care and handling of the reel's power cord.

Other Maintenance Points

Additional important maintenance tips for the reel.

Buttons and Display Overview

Button Identification

Labels and numbering for the reel's control buttons.

Display Element Identification

Labels for the reel's various display screens and indicators.

Button Functions

Detailed explanation of how each button operates the reel's functions.

Display Functions

Explanation of what each display indicator means and shows.

Reel Components and Functions

Reel Part Identification

Visual identification and numbering of reel components.

Enclosed Items

List of accessories included with the reel.

Component Function Details

Detailed explanations of each reel part's purpose and operation.

Line Data Input (with Input Roller)

Step-by-Step Input Procedure

Instructions for inputting line data using the Input Roller.

Completing Input and Error Handling

Final steps for data input and how to address errors.

Line Data Input (Known Length - P1)

Inputting Line Length

Method for inputting line length when it is known beforehand.

Finalizing Length Input

Steps to complete line length input and data verification.

Line Data Input (Backing Line - P2)

Inputting Backing Line Data

Procedure for inputting data for the backing line.

Completing Backing Line Input

Final steps to input backing line data and error handling.

Line Data Input (Backing Line 2 - P3)

Inputting Second Backing Line Data

Procedure for inputting data for a second backing line.

Completing Second Backing Line Input

Final steps for second backing line data input and troubleshooting.

Functional Settings - Mode Display

How to Set Functions

General guide on using the mode setting display and power lever.

Setting Jigging and Pickup

Details on setting jigging patterns and pickup speed.

Setting Other Functions

How to set line feeding, chumming timer, fishing record, and revision.

Preparation - Before Fishing

Surface Depth Setting

How to set the counter to zero at the water's surface for accurate depth.

Main Line Breakage

Procedure to follow if the main line breaks or is cut.

Functional Settings - Auto Stop

Auto Stop Setting

How to set the desired depth for automatic line stopping.

Auto Stop Operation

How the auto stop function works during winding.

Functional Settings - Line Sending

Line Sending Function Operation

How to use the line sending function and adjust its speed.

Functional Settings - Pickup Speed

Pickup Speed Preference

How to set and adjust the pickup speed.

Functional Settings - Inverse Counter

Inverse Counter Usage

How to use the inverse counter for depth and fishing time.

Functional Settings - Jigging

Jigging Function Setup

How to set up the jigging pattern, length, and range.

Jigging Master Settings

Detailed settings for jigging patterns and lengths.

Jigging Waiting Time and Range

Setting waiting time between jigs and the jigging depth range.

Functional Settings - Winding Speed

Winding Speed Display

How to display and interpret the winding speed.

Functional Settings - Remaining Time to Auto Stop

Displaying Remaining Time

How the display shows remaining time before auto stop.

Functional Settings - Chumming Timer

Chumming Timer Setup

How to set the chumming timer for automatic winding.

Chumming Timer Operation

How the chumming timer functions and restarts.

Functional Settings - Display Recalibration

Display Revision Procedure

How to recalibrate the counter for accurate depth readings.

Functional Settings - Rod Clamp

How to Fix the Rod Clamp

Instructions for attaching and securing the rod clamp.

Useful Functions

Various Alarms

Explanation of the different audible alarms and their meanings.

Display Light

Information about the display backlighting feature.

Breaker Display

How the reel indicates overload protection activation.

Reel Specifications

Specification List

Detailed technical specifications of the reel.

Counter Display Range

Information on the depth display range for the reel's counters.

Parts List

Component Breakdown

Detailed list of reel parts with part numbers.

Trouble Shooting

Common Symptoms and Solutions

Table listing common issues and their resolutions.

Reference Information

Company Contact Details

Contact information for various Daiwa offices globally.

Limited Warranty Terms

Details of the reel's warranty period and conditions.

TANACOM BULL 750 Specifications

General IconGeneral
ModelTANACOM BULL 750
CategoryElectric Reel
Gear Ratio2.3:1
Bearings4
Voltage12V
Battery TypeLithium

Related product manuals