Tanaka ACR-M3 User Manual

Micro Carbon Residue Tester
Model ACR-M3
Instruction Manual
Rev.2.10 100421
IMPORTANT:
*This Manual contains important technical
information as wall as safety information.
*Read this Manual thoroughly before use, and
keep it for later use.
TANAKA SCIENTIFIC LIMITED

Tanaka ACR-M3 Specifications

General

Brand	Tanaka
Model	ACR-M3
Category	Test Equipment
Language	English

Summary

Overview of Model ACR-M3

Installation

Installation Site

Guidelines for selecting a suitable location for installing the tester.

Electric Connection

Instructions for making proper and safe electrical connections.

Nitrogen Gas Connection

Procedure for connecting the nitrogen gas supply.

Exhaust Connection

Details on connecting the exhaust system and handling condensate trap.

Routine Inspection Before Day's Use

Operation

Power ON

Steps to turn on the tester and initial system checks.

Nitrogen Gas Pressure and Flow Rate Adjustment

Procedure to set nitrogen gas pressure and flow rates.

Preparation of Test Sample

Guide on selecting and preparing sample vials and their weights.

Processing of Samples

Detailed steps for running the carbon residue test cycle.

Final Weighing

Instructions for weighing sample vials after the test.

Calculation

Method for calculating the carbon residue percentage.

Parts and Consumables, Making Self Diagnosis, and Maintenance

Parts and Consumables

List of spare parts and consumables for the ACR-M3 tester.

Periodical Inspection and Cleaning

Procedures for inspecting and cleaning the tester's components.

In Case of Abnormal Operation or Trouble

Post-sales Servicing

Precaution in Case of Loss of Instruction Manual

Caution When Transferring This Tester

Specifications