To Next PageTo Next Page
Need help?Do you have a question about the Tanaka TBC-260PF and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Displacement | 25.4 cc |
| Weight | 5.1 kg |
| Shaft Type | Straight |
| Handle Type | Loop |
| Power Output | 0.8 kW (1.07 hp) |
Engine exhaust contains chemicals known to cause cancer, birth defects, and reproductive harm.
Careless or improper use of the unit may cause serious or fatal injury.
Guidelines for user safety during operation, covering personal protection and conduct.
Procedures to ensure the power tool itself is safe and properly maintained before use.
Critical safety procedures for handling fuel to prevent fire and explosion hazards.
Precautions for safe cutting, including debris management and operator control.
Safety measures to follow during maintenance and repair activities.
Guidelines for safely transporting and storing the unit to prevent damage or accidents.
Connects the drive shaft tube to the engine clutch case.
Attaches the cutting head or blade assembly to the drive shaft.
Attaches and adjusts the unit's handle for comfortable operation.
Connects the throttle wire and stop cord to the engine controls.
Installs the safety blade guard onto the cutting attachment.
Mounts the cutting blade onto the angle transmission.
Details the correct type of fuel and oil mixture for the engine.
Procedures and safety precautions for refueling the unit.
Step-by-step guide on how to start the engine.
How to operate the unit for cutting, including safety and technique.
Proper procedure for shutting down the engine and unit.
How to adjust the carburetor for optimal engine performance and idle speed.
Instructions for cleaning and replacing the air filter.
Information on inspecting, cleaning, and replacing the spark plug.
Guidance on cleaning the muffler to maintain engine performance.
Importance of keeping engine cooling fins clean for proper operation.
Lubrication and maintenance of the flexible drive shaft.
Checking and maintaining the grease level in the angle transmission.
Instructions for handling, sharpening, and replacing cutting blades.
Provides a general schedule for routine maintenance tasks.
Daily checks and cleaning tasks for the unit.
Weekly maintenance tasks, including spark plug and air filter checks.
Monthly maintenance tasks, including fuel tank and carburetor cleaning.
Crucial warning about using blade conversion kits and proper installation.
