MEANINGS OF SYMBOLS
NOTE: Some units do not carry them
symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully understand and observe the following safety precautions and warnings.
Careless or improper use of the unit may cause serious or fatal injury.
Read, understand and follow all warnings and instructions in this manual and on the unit.
Always wear eye, head and ear protectors when using this unit.
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See “MAINTENANCE”.
Contents
WHAT IS WHAT? .............................................................................. 3
WARNINGS AND SAFETY INSTRUCTIONS .................................... 4
SPECIFICATIONS ............................................................................. 5
ASSEMBLY
PROCEDURES ............................................................. 7
OPERATING PROCEDURES ............................................................ 7
MAINTENANCE ................................................................................ 9
2
000BookTHT-210BEng.indb2000BookTHT-210BEng.indb2 2009/08/188:52:232009/08/188:52:23
To Next Page
Loading...
Need help?
General
