7
B-0108 Inlet Screen/Washer Repair Kit -- 108S-RK
To replace the inlet screen/washer between the top of the valve body and the 7/8”-20
adapter.
1. Shut off water supply to spray valve.
2. By inserting a 3/8” L-wrench into the 7/8”-20 adapter, unscrew and remove the adapter
as well as the screen and washer.
3. Insert new one-piece screen/washer into valve body.
4. Place Loctite 222 on the threads of the 7/8”-20 adapter and install adapter, using the
3/8” L-wrench to tighten.
5. Turn water on to spray valve and check for leaks.
General Instructions
Loctite 222 (1)
Inlet Filter (1)
Inlet Screen/Washer
To Next Page
Loading...
