T&S B-0108 Series User Manual

Installation and
Maintenance
Instructions
B-0108 Series
SPRAY VALVE
US Patent
#
7,150,415
& International Patents
Limited One Year Warranty
T&S warrants to the original purchaser (other
than for purposes of resale) that such product is
free from defects in material and workmanship
for a period of one (1) year from the date of
purchase. During this one-year warranty period,
if the product is found to be defective, T&S shall,
at its options, repair and/or replace it. To obtain
warranty service, products must be returned
to...
T&S Brass and Bronze Works, Inc.
Attn: Warranty Repair Department
2 Saddleback Cove
Travelers Rest, SC 29690
Shipping, freight, insurance, and other
transportation charges of the product to T&S
and the return of repaired or replaced product
to the purchaser are the responsibility of the
purchaser. Repair and/or replacement shall be
made within a reasonable time after receipt by
T&S of the returned product. This warranty does
not cover Items which have received secondary
fi nishing or have been altered or modifi ed after
purchase, or for defects caused by physical
abuse to or misuse of the product, or shipment
of the products.
Any express warranty not provided herein, and
any remedy for Breach of Contract which might
arise, is hereby excluded and disclaimed. Any
implied warranties of merchantability or fi tness
for a particular purpose are limited to one year in
duration. Under no circumstances shall T&S be
liable for loss of use or any special consequential
costs, expenses or damages.
Some states do not allow limitations on how
long and implied warranty lasts or the exclusion
or limitation of incidental or consequential dam-
ages, so the above limitations or exclusions may
not apply to you. Specifi c rights under this war-
ranty and other rights vary from state to state.
P/N: 098-015971-45 Rev. 2
Date: 08-26-10
Drawn: TEH
Checked: JRM 10-07-10
Approved: JHB 10-08-10

T&S B-0108 Series Specifications

General

Brand	T&S
Model	B-0108 Series
Category	Control Unit
Language	English

Summary

Limited One Year Warranty

Exploded View and Part Numbers

Exploded View

Provides a visual breakdown of the spray valve components with numbered parts for identification.

Part Number Guide

Lists all individual parts of the B-0108 spray valve and corresponding part numbers, including specific repair kits.

General Installation and Operation

Installation Steps

Step-by-step guide for removing the old valve and installing the new spray valve, referencing visual aids.

Operation Guide

Instructions on how to activate the spray valve, use the continuous flow latch, and deactivate it safely.

Repair Kit Instructions

Valve Repair Kit (108V-RK)

Detailed instructions for disassembling and reassembling the valve assembly using the 108V-RK kit.

Trigger Repair Kit (108T-RK)

Step-by-step guide for replacing trigger components using the 108T-RK kit, including spring orientation.

Inlet Screen/Washer Repair Kit (108S-RK)

Procedure for replacing the inlet screen and washer using the 108S-RK kit with specified tools.

Low Flow Spray Face Repair Kit (108CSF-RK)

Instructions for replacing the 0.65 GPM spray face and washer with the 108CSF-RK kit.

High Flow & 1.48 GPM Spray Face Repair Kits

Guide for replacing High Flow and 1.48 GPM spray faces and washers using the 108HSF-RK and 108SF-RK kits.

Related Products and Company Information

Related T&S Brass Product Line

Showcases other spray valve models (B-0107 and B-0107-C) from the T&S product line.

T&S Brass and Bronze Works, Inc. Contact

Provides company contact details, including address, phone, fax, and email for inquiries.