8
B-0108 Low Flow Spray Face Repair Kit -- 108CSF-RK
EPAct 2005 Compliant 0.65 GPM Fan Spray Repair Kit
1. Shut off water supply to spray valve.
2. With hand or pliers, use center ribs to turn the spray face counter-clockwise and re-
move spray face and washer.
3. Place new washer in recess on top inside of new spray face.
4. Holding spray face horizontal with washer facing up, place spray face into spray valve
and secure by rotating clock-wise until tight. Pliers may be used for this, but do not over-
tighten and be careful not to damage nozzle.
5. Turn water on to spray valve and check for leaks.
General Instructions
B-0108 Low Flow
Spray Face (1)
Washer (1)
To Next Page
Loading...
