Page 4
Safety Instructions
Your system is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the following
safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heated source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure
you leave plenty of space around the system for ventilation. Never insert objects of any kind
into the ventilation openings.
Use this product in environments with ambient temperatures between 0°C and 40°C.
If you use an extension cord, make sure that the total ampere rating of the devices plugged
into the extension cord does not exceed its ampere rating.
Attention during use
Do not step on the power cord or let anything rest on top of it.
Do not spill water or any other liquid on your system.
When the system is turned OFF, a small amount of electrical current still flows. Always
unplug all power, modem, and network cables from the power outlets before cleaning the
system.
If you encounter the following technical problems with the product, unplug the power cord
and contact a qualified service technician or your retailer.
The power cord or plug is damaged.
Liquid has been spilled into the system.
The system does not function properly even if you follow the operating instructions.
The system was dropped or the cabinet is damaged.
The warranty does not apply to products that have been disassembled by users.
To Next Page
Loading...
General