Tangent spectrum X5 BT - Specifications

CONNECT A TURNTABLE
AUDIO
PHONO
[For use with a turntable without built-in phono pre-amp]:
Slide the Phono/ Line switch to phono position.
Connect the RCA L/R from your turntable to the RCA L/R inputs on the rear panel of
the Tangent Spectrum X5 or X6 BT.
Connect the ground wire from the turntable to the GND on the rear panel of the
Tangent Spectrum X5 or X6 BT.
Press AUX 1 on the Tangent Spectrum X5 or X6 BT remote.
SPECIFICATIONS X5BT X6BT
Speaker Type:
Tweeter/Midrange/Woofer:
Powered Speaker
1"/ 1x5"
Powered Speaker
1" / 2x5"
Amplifier power: 2x50W 2x60W
Sensitivity: 88dB 90dB
Frequency response:
Amplifier type/AC Power:
Input Connections:
Cabinet finish:
Cabinet[WxDxH]mm:
Net weight [Kg]
60Hz-20kHz 50Hz-20kHz
Class-D / AC100-240V/50-60Hz
Bluetooth/jack 3.5/Line RCA/Optical/Coaxial/Phono
Black matt or White matt painting
166 x 205 x 340mm 66 x 268 x 923mm
4 kg/ unit 13,5 kg/ unit