UK
BLUETOOTH FUNCTION
BLUETOOTH PAIRING
1. Power your Spectrum X6BT on.
2. On the remote, press Bluetooth key.
3. Please make sure that the Bluetooth function is enabled on your
Bluetooth Audio Device.
4. On the remote, select Pair key. This will put your Spectrum X6BT into
detectable mode. Front LED will ash quickly.
5. On your Bluetooth Audio Device, please select Tangent Spectrum. If you
are asked for code, please use 1234 or 0000.
6. If pairing is successfull, front LED will stay solid.
Pairing between your Spectrum X6BT and your Bluetooth Audio Device is to
be made only once. Further connections will not need pairing.
REMOTE CONTROL AND YOUR BLUETOOTH AUDIO DEVICE
Using the Spectrum X6BT remote control, you will be able to use the
following orders:
- Play
- Pause
- Next track
- Previous Track
For this to work, your Bluetooth Audio Device will need to be compatible
with AVRCP.
To Next Page
Loading...
Need help?
General
