To Next PageTo Next PageHow to fix error with impedance measurement on Tanita DC-13CU Personal Care Products?
To resolve an impedance measurement error with your Tanita Personal Care Product, ensure you're holding the grip with bare hands. If your palms are dry, apply about 0.5mL of water using a dropper before the measurement. Also, verify the input details and try turning the power off and on before attempting the measurement again.
What to do if “Sd-F” is displayed on Tanita DC-13CU?
If “Sd-F” is displayed on your Tanita Personal Care Product, it indicates there is insufficient space on the SD card. You should transfer data from the SD card to another device or delete unnecessary files to free up space.
Why does Tanita Personal Care Products show error with zeroing?
If you're experiencing a zeroing error with your Tanita Personal Care Product, check the following: * Ensure the equipment is placed on a stable, non-vibrating surface. * Verify that the measuring platform is not tilted. * Make sure nothing is blocking the gap in the measuring platform; remove any obstructions.
What does “Sd-P” or “Sd-E” mean on Tanita Personal Care Products?
If “Sd-P” or “Sd-E” is displayed on your Tanita Personal Care Product, it may indicate an SD memory card drive error. Try turning the power off and on. If the problem persists, format the SD memory card. Note that the device might be damaged.
What to do if Tanita DC-13CU run out of print paper?
If your Tanita Personal Care Product runs out of print paper, supply more paper. In case the printer is not in use, press the key and redo the initial setting.
General| Brand | Tanita |
|---|---|
| Model | DC-13CU |
| Category | Personal Care Products |
| Language | English |
Details the product's application and target users.
Highlights the device's ease of use and measurement speed.
Precautionary measures to avoid injury and property damage.
Advice on conditions and posture for precise measurements.
Daily, weekly, and monthly checks for optimal equipment condition.
Visual examples of improper posture and contact during measurement.
Verifying all necessary components are included in the package.
Instructions for leveling the scale and placing the mat correctly.
Overview of device parts and initial connection procedures.
Guide to loading the thermal paper for printing results.
Instructions for inserting and using an SD card for data storage.
How to turn the device on/off and emergency shutdown.
Guide to adjusting various device settings and parameters.
Switching between Body Composition and Scale modes.
Step-by-step guide for performing body composition analysis.
Explanation of displayed results like Body Fat, Muscle, Water, etc.
Instructions for using the device in basic scale mode.
Guidelines for athletic mode and target body fat settings.
Customizing which data items are printed.
Overview of available data items for different print presets.
Details on how to select specific items for printing.
Procedure for accessing data saved on the SD card.
Methods for exporting data via USB/RS and saving to SD card.
Solutions for common measurement-related errors like Err40.
Troubleshooting for blank or error displays on the screen.
Solutions for print paper or cover-related problems.
Guidance for SD card full, drive errors, or damage.
Details on model number, power source, and current range.
Specifications for measurement system, frequency, and range.
Information on measurement system, range, and accuracy.
Environmental requirements for operation and storage.
Lists of valid input values and output data parameters.
