Why Tanita Personal Care Products switches on by itself?
If the device switches on even though the power has not been switched on for Tanita Personal Care Products, it may be due to a device that has a communication function, microwave oven, or other device that emits radio waves such as a wireless telephone being used near the device.
Why Tanita Personal Care Products only displays weight, BMI, body fat percentage and heart rate?
If only weight, BMI, body fat percentage, and heart rate are displayed on your Tanita Personal Care Product, it is because items other than these cannot be displayed for persons aged 5 to 17.
Why Tanita Personal Care Products cannot measure body composition?
If you cannot measure body composition even when individual data is set on your Tanita Personal Care Product, it is likely that the individual data settings are incomplete. You need to measure body composition once after entering individual data.
Why Tanita Personal Care Products shows body composition monitor and smartphone cannot be connected?
The body composition monitor and smartphone may not be able to connect because they are out of range. The communication range for the device is 5m with no obstructions. Also, ensure that “Bluetooth” is turned on in the smartphone settings.
What to do if the “Measure body composition” button in the app does not work in Tanita Personal Care Products?
If the “Measure body composition” or “Enter data” button in the app doesn't work, ensure that “Bluetooth” is turned on in the smartphone settings. Also, the connection between the app and device is only enabled when the device power is off, so check that the device power is off, then try again.
What to do if Tanita Personal Care Products displays “ ” a number of times?
If “ ” is displayed a number of times on your Tanita Personal Care Product, delete the device registration from the “Settings” > “Bluetooth” settings on the smartphone, then try pairing the device with the smartphone again.
Why Tanita Personal Care Products body weight is not stable?
If the body weight is not stable or less than usual on your Tanita Personal Care Product, and you are using it on a soft surface such as a carpet, the underside of the measuring platform may touch the floor, preventing accurate readings. Perform measurements on a hard, flat, and stable floor.
What to do if Tanita Personal Care Products device and smartphone cannot connect?
If “ ” is displayed and the device and smartphone cannot connect with your Tanita Personal Care Product, try removing and replacing the batteries.
Why Tanita Personal Care Products power turns off during measurement?
If the power turns off and the display disappears during measurement on your Tanita Personal Care Products, it might be because you stepped off the measuring platform during the measurement.
How to fix wrong weight measurement on Tanita Personal Care Products?
If the weight measurement displayed is clearly wrong on your Tanita Personal Care Product, be sure to place the device on a hard, flat, and stable floor for measurement.
General| Type | Body Composition Monitor |
|---|---|
| Connectivity | Bluetooth |
| Display | LCD |
| Weight Capacity | 200 kg |
| Weight Increment | 0.1 kg |
| Power Source | 4 x AA Batteries |
| User Memory | Up to 4 users |
| Measurement Items | Weight, Body Fat, Muscle Mass, Bone Mass, Visceral Fat, Basal Metabolic Rate, Metabolic Age, Physique Rating, Body Water % |
To Next Page
