Tanita TBF-310 - Assembly Instructions

■ TBF-410
Bottom Cover
Attachment Screw*
■ Attaching the Column to the Weighing P to fe r m
©Feed the 2 cord* from the column through the hole in the
weighing platform.
©Screw in the 4 column attachment screw* to attach the
column to the weighing platform
©Remove Bottom Cover.
® liwert the 2 cord* from the column a* <1 replayed, and then
replace the Bottom Cover using the 2 Bottom Cover
Attachment Screw*. When
replacing the bottom cover. plea*e
put the cord* In the appropriate
location so they will not be squeezed f \
between the cover and the weighing l
platform. This may damage the \
cord*. \ \
12