Tanita WB-100 User Manual

GB
14-2,1-chome,Maeno-cho,Itabashi-ku
Tokyo,Japan
Tel:(03)3968-2123 / (03)3968-7048 Fax:(03)3967-3766
Dresdener Strasse 25
D-71065 Sindelfingen,
Germany
Tel : 07031-6189-6
Fax : 07031-6189-71
Unit 301-303 3/F Wing On Plaza,
62 Mody Road, Tsimshatsui East,
Kowloon, Hong Kong
Tel : +852-2838-7111
Fax : +852-2838-8667
2625 South Clearbrook Drive
Arlington Heights,
Illinois 60005 U.S.A.
Toll Free : (800) 826-4828
Tel : 847-640-9241
Fax : 847-640-9261
http : //www.tanita.com
Villa Labrouste
68 Boulevard Bourdon,
92200 Neuilly-Sur-Seine,
France
Tel : 01 55 24 99 99
Fax : 01 55 24 98 68
The Barn, Philpots Close,
Yiewsley, Middlesex,
UB7 7RY,
United Kingdom
Tel : +44-1895-438577
Fax : +44-1895-438511
WB1007061(2)
TYPE WB-100 WB-110
Strain Gauge Load Cell
200kg/0.1kg (440lb/0.2lb) 270kg/0.1kg (600lb/0.2lb)
90~249cm/1cm increments (2ft 11.5in~8ft 2in/0.5in increments)
90~249cm/1cm increments (2ft 11.5in~8ft 2in/0.5in increments)
0.1 increments
15920956mm (6 1/48 1/4 2 1/4in)
30133680mm (11 7/813 1/47 7/8in)
2m(6ft 5in)
Upper 5Digits and Lower 4Digits LCD
Height of numerals 25mm (1in)
RS-232C (D-sub 9pins Male Connector)
AC Adapter (included) Center Minus
DC9V 300mA (LR6•AA Alkaline Battery6 not included)
0.3W max
0ºC/+35ºC (32ºF/95ºF)
5.1kg (11.3lb)
approximately 100 hours of continuous use when using LR6 (AA Alkaline battery)
270kg/0.1kg increments
(600lb/0.2lb increments)
200kg/0.1kg increments
(440lb/0.2lb increments)
Weight Measurement
Measurement System
Maxmum Capacity/Minmum Graduation
Height
Weight
Height
BMI
Display
Platform
Cord Length
Display
Output Data Interface
Power Source
Rated Power
Power Consumption
Temperature Range of usage
Weight of Equipment (Remote Display Version)
10.6kg (23.4lb)
Weight of Equipment (Column Mounted Version)
Battery Life
Input Items
Output Items Display
Size
(Remote Display Version)
3366001070mm (13 1/423 5/842 1/8in)
Size (Column Mounted Version)
Specifications
GB
ELECTRONIC SCALE
WB-100/WB-110
INSTRUCTION MANUAL
Please keep this manual in a safe place,
and make sure it is readily available when-
ever necessary. Please use this product
only after carefully reading this manual and fully
understanding its contents.

(REMOTE DISPLAY VERSION)
(COLUMN MOUNTED VERSION)

Tanita WB-100 Specifications

General

Brand	Tanita
Model	WB-100
Category	Scales
Language	English

Summary

Specifications

Precautions

Product Assembly and Components

Product Components

Lists the components included in the package for both remote and column mounted versions.

Name of Key Operations

Set Up

How to Move the Equipment

Instructions for safely moving the scale unit, with specific methods for different versions.

Level Adjustment

Steps to ensure the scale is placed on a level surface for accurate measurements.

Installation of the Equipment (Remote Display Version)

Guidance on how to install the remote display unit on a wall or using its stand.

Prepare Power Source

Instructions for connecting the AC adapter or installing the required batteries.

Operation

Standard Weighing Procedures

Step-by-step guide on how to perform a basic weight measurement.

Tare Weighing

Instructions on how to use the tare function to exclude container weight.

Cancellation of Tare Weighing Function

Procedure to reset the tare function and return to normal weighing.

BMI Weighing

Guide on how to measure and display Body Mass Index (BMI) based on height and weight.

Changing Measurement Units

How to switch the display between kilograms (kg) and pounds (lb).

RS-232C Communication Specifications

Names and Connection Methods for Signal Lines

Details on the RS-232C connector pin assignments and cable connection.

Weighing Mode Data Transmission

Specifies the data format transmitted by the scale during weighing operations.

BMI Mode Data Transmission

Specifies the data format transmitted by the scale during BMI measurement.