Problem
No solution
is coming out
of the spray
applicator
The applicator
is continuing
to spray
Hose coming
out of unit
Cause What to do
Nozzle may be blocked Spray warm water through
the applicator
Solution cup low Add solution to the cup
Trigger is jamming Spray warm water through the
applicator repeatedly ensuring
the Solution Dial is allowing
maximum water through the
applicator
Solution Dial on Wind in the solution dial
applicator set too low on applicator
Trigger or nozzle is jamming Spray warm water through the
applicator repeatedly ensuring
the Solution Dial is allowing
maximum water through the
applicator
Hose not correctly Ensure the fitting is inserted
fitted to unit and quick connect fitting is
locked into place.
Hose fitting broken Contact your supplier
from over tightening or service agent
To Next Page
Loading...
