tanning essentials CORDLESS

Questions and Answers

E
eric75Aug 17, 2025
Why is solution beading on skin when using tanning essentials CORDLESS Personal Care Products?
- T
  Tiffany GibsonAug 17, 2025
  If the solution is beading on your skin when using tanning essentials Personal Care Products, it might be because too much tanning solution was sprayed. Dab the area with a clean, dry towel and re-spray lightly to blend the tan. Alternatively, the dial might be set too high; reduce the setting. The spray application could also be too slow, so speed up the application or reduce the dial setting (1 is lowest, 5 is highest).
D
danielpageAug 19, 2025
What to do if the solution is splattering with tanning essentials CORDLESS?
- S
  Sara WilliamsAug 20, 2025
  If the solution is splattering when using your tanning essentials Personal Care Products, the airflow setting might be set to MIN. Increase the airflow to MAX by pushing the power button a second time. Also, check if the battery is low and place it on charge if needed. Finally, the solution cup might be too low, so add more solution to the cup.
A
Alicia ShahAug 23, 2025
How to fix bubbling solution from the cup of tanning essentials CORDLESS?
- E
  erica24Aug 23, 2025
  If your solution is bubbling from the cup of your tanning essentials Personal Care Products, it could be due to several reasons. First, ensure the seal is fitted correctly. Second, the solution cup might not be screwed in correctly; unscrew and re-attach it, aligning the unlocked symbol with the dot on the applicator, then twist clockwise until the locked symbol aligns with the dot. Third, the cup might be cross-threaded, so repeat the unscrewing and re-attaching process. Lastly, the solution cup may be overfilled; empty some solution and re-attach the cup.
B
Brittany MorenoAug 26, 2025
What to do if no solution is coming out of tanning essentials Personal Care Products cordless system?
- R
  rboydAug 26, 2025
  If no solution is coming out of your tanning essentials Personal Care Products cordless system, several factors could be at play. First, the nozzle may be blocked; spray warm water through the applicator. Second, the solution pick-up tube might not be fitted correctly; remove and re-fit it. Third, the solution cup might be too low; add more solution. Fourth, the solution dial might be set too low; increase the setting (1 is lowest, 5 is highest). Fifth, ensure the trigger is being pulled. Finally, the trigger might be jamming; spray warm water through the system while the solution dial is set to “C” and pull the trigger repetitively until it releases.
C
Calvin FosterAug 28, 2025
What to do if tanning essentials CORDLESS system will not turn on?
- C
  christopher75Aug 28, 2025
  If your tanning essentials Personal Care Products system will not turn on, the system may have a flat battery. Place it on charge.
N
Nicholas CruzAug 31, 2025
Why does the client appear orange after using tanning essentials Personal Care Products?
- B
  Brandon DixonAug 31, 2025
  If the client appears to be orange after using tanning essentials Personal Care Products, it could be because too much tanning solution was sprayed onto the skin. Exfoliate the skin using a tan remover product. Alternatively, the client may not have followed rinse instructions for rapid tan, so exfoliate the skin. Also, the client may have a low tolerance to DHA, so exfoliate the skin.
C
Carl JohnsonSep 2, 2025
Why is the airflow cutting in and out with tanning essentials CORDLESS Personal Care Products?
- C
  christopher64Sep 3, 2025
  If the airflow is cutting in and out with your tanning essentials Personal Care Products, the battery might be low. Place it on charge. Alternatively, the airflow setting may be set to MIN. Increase airflow to MAX by pushing the power button a second time.
G
gonzalezdonaldSep 5, 2025
Why is my tanning essentials CORDLESS Personal Care Products system leaking?
- J
  johnathanthomasSep 5, 2025
  If your tanning essentials Personal Care Products system is leaking, it could be because the solution cup is not screwed in correctly. Unscrew and re-attach the solution cup. It could also be due to residual solution remaining in the system. Depressurize the applicator, remove the cup, hold the cordless system over the sink, and pull the trigger to drain any residual solution.
D
Dakota McdonaldSep 8, 2025
What to do if tanning essentials Personal Care Products system will not charge?
- H
  hjohnstonSep 8, 2025
  If your tanning essentials Personal Care Products system will not charge, the charging cord might not be attached correctly. Remove and re-fit the charger. Also, ensure the charger port is pushed firmly into the wall socket. Finally, make sure the electricity is turned on at the power point.
B
Brandon SanchezSep 12, 2025
What to do if client has tanning solution in unwanted areas after using tanning essentials Personal Care Products?
- D
  Danny DeleonSep 12, 2025
  If the client has tanning solution in areas they do not wish to tan when using tanning essentials Personal Care Products, it could be because the technician sprayed the area incorrectly, or the client touched a part of their body with a spray-tanned area. Using a damp cloth, wipe the area immediately, or once developed, exfoliate the area using a tan remover product.

Summary

Welcome and Quick Setup Guide

Tanning Essentials Cordless System Components

Lists the components included in the Tanning Essentials Cordless Spray Tan System.

Cordless Applicator Operation Guide

Filling and Securing the Solution Cup

Instructions on filling the solution cup and securely attaching it to the applicator.

Adjusting the Spray Nozzle and Solution Dial

Guidance on setting the spray nozzle orientation and adjusting the solution dial.

Cordless Unit Operation and Charging Guide

Powering On and Controlling Airflow

How to power on the system and adjust airflow settings for drying and application.

Post-Application System Handling and Charging

Steps for turning off the system, changing nozzles, releasing residual solution, and charging.

Cordless Applicator Maintenance Guide

Daily Cleaning Procedure and Storage Recommendations

Step-by-step guide for cleaning the applicator and recommendations for storage.

Troubleshooting: Solution and Airflow Issues

Addressing Solution Bubbling and Airflow Problems

Solutions for common problems like solution bubbling from the cup and intermittent airflow.

Troubleshooting: System Performance Issues

Fixing Solution Splattering and Power;Charging Issues

Solutions for solution splattering, system not turning on, and charging problems.

Resolving System Leaks and Residual Solution

Guidance on addressing system leaks and draining residual solution.

Troubleshooting: Application Output Issues

No Solution Output and Beading Skin Solutions

Solutions for no solution coming out of the system and solution beading on skin.

Troubleshooting: Skin Appearance Issues

Managing Solution Beading and Uneven Tan

Solutions for solution beading on skin and tanning solution in unwanted areas.

Addressing Orange Skin Tone and Tan Development

Explains how to address clients appearing orange or having uneven tan development.

Troubleshooting: Tan Development Issues

Ensuring Desired Tan Darkness

Explains reasons why the spray tan may not develop as dark as desired.

Safety, Warnings & Cautions

General System Safety Precautions and Warnings

Important safety guidelines for using the cordless spray tanning system.

Battery Handling and Product Disposal Guidelines

Information on battery handling, disposal, and product recycling.

Warranty Information and Claim Process

Making a Warranty Claim and Exclusions

Details on making a warranty claim, what is covered, and warranty exclusions.

Warranty Return Form Instructions

Customer and Product Information for Returns

Fields for customer and product details required when returning warranty items.

Safety Information and Warranty Card Details

Model Details and Warranty Registration Process

Fields to record model details and information for warranty registration.

Company Contact and Web Information

Tanning Essentials Contact Details and Links

Address, phone numbers, email, and web links for Tanning Essentials.

The provided manual describes the Tanning Essentials Cordless Spray Tan System, a portable device designed for achieving a professional spray tan. It emphasizes simplicity and ease of use, aiming to deliver a "perfect spray tan."

Function Description

The Tanning Essentials Cordless Spray Tan System is a self-contained unit that applies tanning solution to the skin. It operates wirelessly, providing flexibility and convenience during application. The system allows users to control the spray pattern and solution output, catering to different body areas and desired tan intensities. It also features a drying function to assist in the post-application process.

Important Technical Specifications

While specific numerical technical specifications like battery capacity, motor power, or exact dimensions are not explicitly listed, the manual provides several functional specifications:

Solution Capacity: The solution cup holds between 50-90ml of professional spray tan solution.
Spray Levels: The system offers 5 adjustable spray levels, with 1 being the lowest solution output and 5 being the highest. A setting of 3 is recommended for the body, and 1-2 for the face.
Airflow Settings: The unit has adjustable airflow settings (MIN to MAX) for both application and drying. MIN is recommended for drying, and MAX for application.
Power Source: It is a cordless system, implying a rechargeable battery. It comes with a charger.
Compatibility: The system is designed to be used with professional spray tan solutions. It is explicitly stated that it is NOT compatible with harsh cleaners such as gun cleaners, chlorine bleach, or 100% ethanol.
Operating Temperature: The system should be stored indoors in a cool, dry place below 50°C.
Warranty: The Tanning Essentials Cordless system comes with a one-year warranty from the date of purchase.

Usage Features

The manual outlines a clear, step-by-step process for setting up and using the Cordless Spray Tan System:

Quick Set Up Guide: The system includes:

1 x TE Cordless Applicator System
1 x Adjustable Drying Nozzle
1 x Charger
2 x 90ml Solution Cups with Lid
1 x Adjustable Spray Nozzle
1 x Vegan Leather Carry Case

Cordless Applicator Setup:

Step 1 (Fill Solution Cup): Unscrew the solution cup and fill it with 50-90ml of professional spray tan solution.
Step 2 (Attach Solution Cup): Connect the solution cup to the Cordless system. Align the unlocked symbol on the cup with the dot on the applicator, then twist clockwise until the locked symbol on the cup aligns with the dot on the applicator to secure it.
Step 3 (Set Nozzle): Turn the nozzle to select the desired spray setting. A vertical setting is for up and down spraying, while a horizontal setting is for left to right/right to left spraying.
Step 4 (Adjust Spray Level): Control the amount of solution by adjusting the dial from 1 (lowest) to 5 (highest). Recommended settings are 3 for the body and 1-2 for the face. The manual notes that movement speed affects application; moving too slowly can cause dripping, requiring a reduction in dial setting or an increase in speed.

Cordless Unit Operation:

Step 5 (Power On & Airflow): Hold the power button for 1-2 seconds to turn on the system. Click the power button again to increase airflow from MIN to MAX. MIN is recommended for drying, and MAX for application. The trigger initiates the spray stroke and releasing it finishes the stroke. The system must be moving when the trigger is pulled.
Step 6 (Drying Nozzle Attachment): After application, hold the power button down to turn off the system. Unscrew the retaining nozzle anti-clockwise, remove the adjustable spray nozzle, and replace it with the drying nozzle attachment. Re-attach the retaining nozzle by twisting clockwise to secure the drying nozzle.
Step 7 (Drying Process): Re-power the system with airflow set to MIN. Do not pull the trigger during this step to avoid releasing any residual solution.
Step 8 (Charging): Once treatment is complete and the system is off, place it back on charge.

Troubleshooting: The manual includes extensive troubleshooting guides for common issues, such as:

Solution bubbling from the cup: Caused by an incorrectly fitted seal, improperly screwed-in cup, cross-threaded cup, or overfilled cup. Solutions include fitting the seal correctly, re-attaching the cup, or emptying excess solution.
Airflow cutting in and out: May be due to low battery or airflow setting being on MIN. Solutions are to charge the unit or increase airflow to MAX.
Solution splattering: Can be caused by MIN airflow setting, low battery, or insufficient solution in the cup. Solutions include increasing airflow, charging, or adding more solution.
System not turning on/charging: Could be a flat battery, incorrectly attached charging cord, charger not pushed into the wall socket, or electricity not turned on. Solutions involve charging, re-fitting the charger, pushing the plug firmly, or ensuring power is on.
System leaking: May be due to an incorrectly screwed-in solution cup or residual solution in the system. Solutions include re-attaching the cup or depressurizing the applicator and draining residual solution.
No solution coming out: Possible causes include a blocked nozzle, incorrectly fitted pick-up tube, low solution in the cup, solution dial set too low, or a jammed trigger. Solutions involve spraying warm water through the applicator, re-fitting the tube, adding solution, increasing the dial setting, or pulling the trigger.
Solution beading on skin: Can be due to too much solution, high dial setting, or slow application speed. Solutions include dabbing with a towel, re-spraying lightly, reducing dial setting, or speeding up application.
Client skin issues (beading, tanning in unwanted areas, orange appearance): These are often related to client preparation (moisturizer, perspiration), technician error (spraying incorrectly), client touching tanned areas, too much solution, not following rinse instructions for rapid tan, or low DHA tolerance. Solutions involve dabbing/re-spraying, wiping with a damp cloth, or exfoliating.
Tan not developing as dark as desired: Possible causes include old/heat-affected solution, different solution used, dial set lighter, client showering/perspiring too early, or other factors like diet/hormones/medication, or using soap/body wash. Solutions include checking solution expiry, re-spraying after 8 hours/shower, or referring to the client's specific situation.

Maintenance Features

The manual provides clear instructions for daily maintenance of the Cordless Applicator:

Step 1 (Empty Solution): Unscrew the solution cup and empty any excess solution, preferably over a sink.
Step 2 (Rinse Cup): Rinse the empty solution cup with warm water.
Step 3 (Clean System): Refill the solution cup with warm water, screw it back into the applicator, turn the solution dial to "C" (cleaning setting, implied), and spray until the water runs clear. Ensure the adjustable spray nozzle is attached during this step.
Step 4 (Final Rinse & Reset): Once a cup of water has run through, re-rinse the cup and empty. Re-set the solution dial to the regular spray setting of your choice.
Step 5 (Dry & Store): Wipe any excess water from the applicator with a cloth and leave it out to dry. Store the Cordless system in its carry case indoors in a cool, dry place below 50°C. Do not leave excess solution in the cup.

Important Maintenance Notes:

Maintenance should be performed at the end of each day the applicator is used.
The system is NOT compatible with harsh cleaners such as gun cleaners, chlorine bleach, or 100% ethanol, as these will cause damage.

The manual also includes safety warnings and cautions, emphasizing proper handling, storage, and disposal of the unit and its battery. It advises against exposing the system to excessive heat or naked flames, making unapproved alterations, using it with a damaged power cord, or operating it near water. It also highlights the importance of keeping the device out of reach of children and unplugging it during electrical storms or when unused for long periods. In case of battery leakage, contact with skin and eyes should be avoided, and medical advice sought. Only manufacturer-specified attachments/accessories and power supply should be used. Proper disposal of used batteries according to local regulations is also stressed, with a note that removal of the rechargeable lithium-ion battery should only be conducted by a qualified professional.