CORDLESS APPLICATOR
www.tanningessentials.co
STEP 1
Unscrew the solution cup and fill it with your chosen professional
spray tan solution. 50-90ml max.
STEP 2
Connect the solution cup to the Cordless system.
To securely tighten, align the unlocked symbol on the solution cup
with the dot on the applicator, and twist the cup clockwise until the
locked symbol on the cup aligns with the dot on the applicator.
STEP 3
Set the nozzle by turning it to your desired setting.
The vertical setting is used when spraying up and down, and the
horizontal setting is used when spraying left to right/right to left.
STEP 4
To control the amount of solution released from the fluid nozzle,
adjust the dial to select your spray level. Number 1 is the lowest,
and number 5 is the highest. A higher setting will result in more of
the tanning solution being dispensed. Recommended setting (3) for
the body and 1-2 for the face.
Note: How fast you move will affect the application. If the solution
looks like it is going to drip on the skin you are moving too slowly,
reduce the dial setting or increase the speed.
To Next Page
Loading...