SPRAY APPLICATOR
www.tanningessentials.co
STEP 1
Unscrew the solution cup and fill ¾ full. Overfilling the solution cup
may cause leaks.
STEP 2
Insert solution cup and screw tightly.
STEP 3
Set nozzle by turning, vertical position for up and down and
horizontal position for left and right spraying. The nozzle can also
be turned 360° and adjust diagonally for technicians that are trained
in contouring.
STEP 4
Adjust solution dial on the back of the applicator to choose the
amount/flow of solution you would like to dispense. A higher setting
will result in more solution being distributed. Setting your applicator
on 2-4 for the body and 2 for the face are best recommended.
STEP 5
Attach hose- Insert the longer narrow hose fitting into the bottom of
the applicator and turn anticlockwise until firm, ensuring the fitting
lines up with the bottom of the applicator.
To Next Page
Loading...
