SPRAY UNIT
www.tanningessentials.co
STEP 1
Attach hose to unit. Insert hose fitting into unit and turn clockwise
until firm. This connection is similar to a light bulb connection and
avoid over tightening as this may result in broken components.
STEP 2
Attach Power cord and turn power on at the wall switch.
STEP 3
Turn on your unit by pressing the ON/OFF button and choose your
desired POWER setting by pressing the + or – on the control panel.
The power is controlled via the digital control button located at the
top of the unit and consists of six spray levels. Recommended power
setting is 3 depending on the solution and speed of application.
To Next Page
Loading...
