Tannoy ACTIVE STUDIO MONITORS - Setup Menu

29
Setup Menu
Press ENTER to access sub-menus
Setup
Press ENTER to access select mode. Select mode is indicated by “ * ”
Press ENTER to confirm choice
Empty
Custom
Stereo Analog
Stereo Digital
Stereo 192kHz
Surround Analog
Surround Digital
Surround 192kHz
5.1 dig/6 Master
Set Monitor Task
For the System Controller/Master monitor to identify and operate all monitors in the setup, each monitor must be given
one of the following tasks indicating function and position.
No Task L SUB
L Front R SUB
R Front LS Chain
Center RS Chain
(C) SUB L Inner
L Sur R Inner
R Sur Custom 1-4 (Reserved for future use)
C Sur
Press ENTER to access task options
Use ARROW keys to select task
Press ENTER to confirm selected task
External Clock
Press ENTER to access sub-menus
BNC Sync On:
The monitor attempts to lock on the word Clock BNC.
BNC Sync Off:
The monitor will attempt to lock on the AES Input.
Calibrate Monitor
Press ENTER
Select monitor to calibrate using the ARROW keys
Press ENTER