Tannoy ACTIVE STUDIO MONITORS - Page 38

38
iDP SOFT
™
(cont.)
During Software upload various messages could be displayed:
Example:
“Precision monitor updated successfully” means the Precision monitor has been updated successfully.
Precision iDP™ monitor updated successfully
If the message: “Failed to update Precision iDP™ monitors” – means the monitor has reported an error during software
upload. This could be caused by communication errors. Please retry.
<OK>
Press to exit screen and execute AutoDetect command if marked.
System Setup
<Configuration>
Select your current setup.
<Analog Gain>
Range: +9dBu, +15dBu, +21dBu or +27dBu
Set to match analog Input gain to match the signal fed to
the optional Analog Input card.
<BNC Sync>
BNC Sync On:
The monitor attempts to lock on the word clock BNC.
ACTIVE STUDIO MONITORS