Tannoy HTS - HTS Speaker System Technical Specifications

9 TECHNICAL SPECIFICATIONS
SATELLITE
Recommended amplier power 25 – 100 Watts (RMS)
Sensitivity (2.82V @ 1m) 87dB
Nominal impedance 8 Ohms
Frequency response (-6dB) 100Hz – 40kHz
Drivers HF: 19mm (3/4”) titanium WideBand
TM
dome,
with neodymium magnet system
LF: 75mm (3”) paper cone
Crossover Frequency 3kHz (LF to HF)
Magnetic shielding Yes
Weight 1.4kg (3.1lbs)
Dimensions (H x W x D) 160mm x 106mm x 142mm (6.3” x 4.2” x 5.6”)
(including grille)
Supplied accessories Wall bracket, self adhesive feet
CENTRE
Recommended amplier power 25 – 100 Watts (RMS)
Sensitivity (2.82V @ 1m) 87dB
Nominal impedance 6 Ohms
Frequency response (-6dB) 100Hz – 40kHz
Drivers HF: 19mm (3/4”) titanium WideBand
TM
dome,
with neodymium magnet system
LF: 2 x 75mm (3”) paper cone
Crossover Frequency 3kHz (LF to HF)
Magnetic shielding Yes
Weight 2.3kg (5.1lbs)
Dimensions (H x W x D) 106mm x 250mm x 166mm (4.2” x 9.8” x 6.6”)
(including grille)
Supplied accessories Wall bracket, self adhesive feet
TOWER
Recommended amplier power 25 – 100 Watts (RMS)
Sensitivity (2.82V @ 1m) 88dB
Nominal impedance 6 Ohms
Frequency response (-6dB) 80Hz – 40kHz
Drivers HF: 19mm (3/4”) titanium WideBand
TM
dome,
with neodymium magnet system
LF: 2 x 75mm (3”) paper cone
Crossover Frequency 3kHz
Magnetic shielding Yes
Weight 6.2kg (13.7lbs)
Dimensions (H x W x D) 904mm x 106mm x 167mm (35.6” x 4.2” x 6.6”)
(including grille, without plinth)
Dimensions (H x W x D) 922mm x 179mm x 225mm (36.3” x 7.1” x 8.9”)
(including grille and plinth)
Supplied accessories Floor coupling spikes with oor protective cups,
Self adhesive feet