Revolution Signature DC6 Revolution Signature DC6 T Revolution Signature D6LCR
PERFORMANCE
Recommended amplifier power 20 – 150 20 – 175 20 – 175
(Watts RMS)
Continuous power handling 75 87 87
(Watts Peak RMS)
Peak power handling (Watts) 300 350 350
Sensitivity (2.83 Volts @ 1m) 88dB 89dB 89dB
Nominal Impedance (Ohms) 8 8 8
Frequency response (-6dB) 46Hz – 35kHz 34Hz – 35kHz 36Hz – 35kHz
Dispersion (degrees conical) 90 90 90
DRIVE UNITS
Dual Concentric™ high frequency 25mm (1”) Titanium dome 25mm (1”) Titanium dome 25mm (1”) Titanium dome
With Tulip WaveGuide
TM
With Tulip WaveGuide
TM
With Tulip WaveGuide
TM
Dual Concentric™ low frequency 150mm (6”) treated paper 150mm (6”) treated paper 150mm (6”) treated paper
pulp cone with pulp cone with pulp cone with
Rubber surround. Rubber surround. Rubber surround.
44mm (1.75”) edge 44mm (1.75”) edge 44mm (1.75”) edge
wound voice coil wound voice coil wound voice coil
Bass Driver - 150mm (6”) treated paper 150mm (6”) treated paper
- pulp cone with pulp cone with
- Rubber surround. Rubber surround.
- 44mm (1.75”) 44mm (1.75”)
- Wound voice coil Wound voice coil
Passive Radiator - - 150mm (6”) treated paper
pulp cone with
Rubber surround
CROSSOVER
Crossover frequency 1.8kHz 1.7kHz 1.7kHz
Crossover Type Passive low loss Passive low loss Passive low loss
2nd order LF, 1st order HF 2nd order LF, 1st order HF 2nd order LF, 1st order HF
CONSTRUCTION
Enclosure type Front ported Front ported Passive Radiator ported
Volume 10.8L (0.381 cu. ft.) 29.6L (1.045 cu. ft.) 18.4L (0.650 cu. ft.)
Dimensions (excl grille) H x W x D 365 x 226 x 225mm 950 x 226 x 225mm 226 x 600 x 225mm
(14.37 x 8.90 x 8.86”) (37.40 x 8.90 x 8.86”) (8.90 x 23.62 x 8.86”)
Weight
7.2kg (15.87lbs) 16.4kg (36.16lbs) 12.2kg (26.9lbs)
Finish Light oak and Espresso Light oak and Espresso Light oak and Espresso
REVOLUTION SIGNATURE MANUAL _011
TECHNICAL SPECIFICATIONS
To Next Page
Loading...
Need help?
General