Tannoy ST50 - Technical Specifications

7
FREQUENCY (Hz)
EFFECT OF CROSSOVER FREQUENCY CONTROL
FIG. 4
-30
5k
-24
-12
-18
10k 20k 50k 100k
18kHz
14kHz
16kHz
200k
(dB)
-6
0
SPL
6
Recommended amplifier power: Up to 200W
Power rating to DIN IEC 268: 110W RMS
450W peak
Maximum sensitivity (2.83V @ 1m): 93dB
Nominal impedance: 8 ohm
Frequency response (-6dB): To 54kHz, usable output (-18dB) to 100kHz
DRIVE UNIT:
Driver type: 25mm diameter 25-micron titanium dome,
24 Karat vapour deposited gold finish,
with neodymium magnet system
CROSSOVER:
Crossover type: 3rd order high pass
Crossover frequency: 14, 16 or 18kHz adjustable
Level adjustment: 85dB, 89dB, 93dB
ST50
Due to our policy of continuous improvement, all specifications are subject to change
without notice.
TECHNICAL SPECIFICATIONS